Set-Up Check List for Gravity-
Feed Applications
This section lists the parameters you have already set (by following the instructions from
the start of the "Setting Up Gravity-Feed Applications" section up to this point in the
manual). This section also lists additional parameters you may want to set up to get
your particular gravity-feed application running to your satisfaction.
Parameters You Have Already Set Up
Listed below are the parameters you have already set up for a typical gravity-feed
application.
Product Parameters
•
Product name
Reject Parameters
•
Reject-delay time
•
Reject-duration time
Contaminant-Detection Parameters (Set by the Detector's Calibrate Functions)
•
X and R noise thresholds
•
Speed-filter setting
•
Detect level
•
Phase-angle setting
Page 76
Thermo Scientific APEX User's Guide