Thermo Scientific APEX 100 User Manual page 273

Inputs (Menu Selectable)
Six Inputs, Active 12v DC + 12 volt auxiliary supply for input sensors for the following.
• Belt Speed Sensor (uses 5v auxiliary supply provided)
•
Keylock
• Product Select 1
• Product Select 2
• Infeed photo-eye
• Reject Confirmation 1 (bin full)
• Reject Confirmation 2
• External Suppression
Electrical Supply
85 to 260 VAC, 47 to 65 Hz, 100 watts maximum
Product Speed
0.5 m/min (1.7 ft/min) to 1000 m/min (3,300 ft/min)
Air Supply (AuditCheck)
5.5 bar (80 psi)
Environmental
• Operating Temperature
-10° C to + 40° C (+14° F to +104° F)
o
• Relative Humidity
0% to 80% non-condensing
o
80% to temperatures to 31° C (87° F) decreasing linearly to 50% relative
o
humidity at 40° C (104° F)
Maximum Surface Temperature
60° C (140° F)
Altitude
Up to 2000 m (1.2 miles)
Location
Indoor or outdoor use. Direct sunlight on the aperture could cause problems. Protect the
equipment from direct sunlight.
Environmental Protection
IP69K
TYPE 3 Enclosure
Ventilation
None required
Thermo Scientific APEX User's Guide Page 273