Resetting The Counts When Products Change - Thermo Scientific APEX 100 User Manual

Resetting the Counts When Products Change

When analyzing a particular product (for example, Product 001), the reject-totals menu
displays the total number of rejects made for that particular product. In addition, in
conveyor applications, the reject-totals menu displays the total number of units of
product that have been analyzed. The statistics settings menu allows you to reset both
counts for a particular product (for example, Product 001), before you start analyzing
another product (for example, Product 002).
Statistics Settings
Resetting the Total-Reject and Total-Product Counts
1) Make sure the statistics settings menu is highlighted, as shown above.
2) Press the Go button and the following menu appears.
Statistics Settings
3) Press the right-navigation button to highlight the reset-counts menu.
Reset Counts on Product Change
(continued...)
Thermo Scientific APEX User's Guide Page 183