Activating A Reject Print-Out - Thermo Scientific APEX 100 User Manual

Example of an End-of-Day Print-Out
A typical end-of-day print-out looks like this.
***********************************************
APEX THERMO BATCH REPORT
***********************************************
MACHINE ID:
BATCH CODE:
FROM:
TO:
PRODUCT:
PHASE:
DETECT LEVEL
REJECT COUNT:
***********************************************
QUALITY TEST RESULTS
***********************************************
DATE TIME
***********************************************
AUDITCHECK TEST RESULTS
***********************************************
DATE TIME
***********************************************
FAULTS ALARMS WARNINGS
***********************************************
DATE TIME

Activating a Reject Print-Out

This function prints a brief report every time the detector rejects a product. For this
function to work, you must first have activated the printer.
Activate Reject Printing
1) Make sure the reject function is highlighted.
2) Press the Go button and the X is replaced by a check mark. Reject printing is now
activated.
3) Press the Back button to exit the function.
Page 246
DG DAIRY
01-123456
2008/05/21/ 13:30:45
2008/05/21/ 12:59:59
MILK--P.M. SHIFT
2.18
40
1
RESULT
RESULT
TYPE
Thermo Scientific APEX User's Guide