Thermo Scientific APEX 100 User Manual page 274

Front Panel
Manufacturers: GE Plastics, Chi Mei
Material reference: Cycolac, Polylac 757
Surface treatments: None
Operating temperature: Continuous at 80° C (176° F)
Battery
Approved type according to Table 3 of IEC 60086-1 Type E.
Battery type: Sonnenschein SL-350 PCRN
Nominal voltage: 3.6 V
Electrochemical system: Lithium thionyl-chloride
Rated capacity: 1000 mA-hours
Standard Features and Options
Listed below are the standard features and options available for your APEX 500, 300,
and 100 detector.
Standard Features
Your APEX included the following standard features.
• Multi-coil design
• Ease of operation.
• Reject confirmation.
• Product capacity of 100.
• Variable speed operation.
• Dual frequency/dual gain.
• Epoxy-lined head rated to IP69K.
• Two independent reject outputs.
• Quality test on consecutive units of product.
• Icons with help text in ten languages.
• Sensitivity performance enhancement.
• Reject inhibit to prove reject verification system.
• AuditCheck and quality-assurance rejects to a separate reject bin.
• A bright display with a wide viewing-angle.
Statistics and Information
Your APEX provides the following user information and statistics.
• Current product name.
• Total number of rejected units of product.
• Number of units of product rejected by the quality test.
• Number of units of product rejected by AuditCheck.
• Number of units of product passed (when in package mode).
• Error messages using LEDs and warning screens.
Page 274 Thermo Scientific APEX User's Guide