Naming Your Detector
This function allows you to name your detector and have that name added to your
printed reports. This is useful if you have more than one APEX working in your facility.
Before the detector's name is added to your printed reports, you must first activate the
printer, as described above.
Machine Identification
1) Highlight the detector icon, press the Go button, and the keyboard screen appears.
2) Enter a name for your detector. (Limit = 9 alpha-numeric characters.)
3) Highlight the exit-and-save key in the keyboard screen.
4) Press the Go button and the name of your detector appears in the menu, as shown in
the example below. (Our APEX is working at the DG DAIRY.)
Machine Identification
Thermo Scientific APEX User's Guide
Page 243