Setting The "Reject Packs During Learn" Function - Thermo Scientific APEX 100 User Manual

4) Press the Go button, and the check mark moves to the distance (ruler) icon.
Reject 1 Duration – Distance
5) Press the Back button to exit the menu and save your distance preference for
managing the reject-1 device. The APEX will now use distance settings in all relevant
reject-1 (or, if selected in step 3 above, reject-2) menus.

Setting the "Reject Packs During Learn" Function

If you want all packages to be rejected during a calibration learn, you need to enable the
"Reject Packs During Learn" function. To enable this function, do the following.
1) Highlight the "Reject Packs During Learn" menu.
Reject Packs During Learn
2) Press the Go button. A checkmark appears, showing this function is now enabled.
Reject Packs During Learn
3) Press the Back button to save your setting and exit the menu.
Page 182 Thermo Scientific APEX User's Guide