Thermo Scientific APEX 100 User Manual page 174

4) Press the Go button to copy the current product settings. (If passwords are enabled,
the keyboard screen appears. Enter your password. Then highlight the exit-and-save
key and press the Go button.)
5) Press the Back button repeatedly to return to the Main Menu, and make sure the
product name ("MILK—A.M. SHIFT") is highlighted, as show in step 2 above.
6) Press the right-navigation button to bring up the (Product 2) screen you previously
named "MILK—P.M. SHIFT," as shown below. The product name with be flashing on
and off. To select the "MILK—P.M. SHIFT," press the Go button.
Product Name
Notice that the detect-level and phase-angle settings are currently set to their default
values of 40 and 90.
7) Navigate to the paste-product function.
Paste Product
8) Press the Go button and the following confirmation screen appears.
Decline
(continued...)
Page 174 Thermo Scientific APEX User's Guide