Changing The Assignment Of An Output Device - Thermo Scientific APEX 100 User Manual

Changing the Assignment of an Output Device

In the following example, you are running a conveyor application, where the main reject
device is currently assigned to Output 1. You want to change the reject device to
Output 4. You would do this as follows.
1) Navigate to the output set-up menu (as described in steps 1–3 on pages 232–33).
Output Setup
2) Navigate to the reject-device output icon, which is highlighted below.
Output 1 Function
3) Press the Go button and a select-option screen appears.
Reject 1 Output
4) Press the left-navigation button to select the X (to un-assign the reject device from
Output 1), and press the Go button. The detector returns you to the original output
screen, which now looks like this.
Output 1 Function
Thermo Scientific APEX User's Guide Page 235