Configuring An Rtu Network; Accessing The Rtu Communications Menu - Thermo Scientific APEX 100 User Manual

Configuring an RTU Network

This section tells you how to use the APEX software to modify the communication
parameters for an RTU network. You can set the following parameters using the APEX
communications menu.
• Slave address (1 through 247)
•
Baud rate (1200, 2400, 4800, 9600, 19200, 38400, and 57600 bits per second)
• Parity (none, odd, or even)

Accessing the RTU Communications Menu

To access the RTU communications menu, do the following.
1) Follow steps 1–7 in the "Accessing the TCP/IP Communications Functions" section
above to reach the screen shown below.
Communications
2) Press the Go button and the "Modbus RTU Configuration" menu appears.
Modbus RTU Configuration
Thermo Scientific APEX User's Guide Page 335