Entering a Value for the Pack-Gap Function
To enter a value for the pack-gap function, do the following.
1) If you are not already looking at page 2 of the "Product Shape and Flow" menu,
follow steps 1–4 in the "Keying In the Pack Length" section above to reach this
menu.
Product Shape and Flow
2) Use the navigation buttons to select the pack-gap menu.
Pack Gap
3) Press the Go button and the pack-gap input screen appears.
Pack Gap
4) Key in an appropriate value for pack gap. (In our example, we have keyed in a value
of 50%.)
Pack Gap
5) Press the Go button to save your pack-gap setting and exit the input screen.
Page 42
Thermo Scientific APEX User's Guide