Displaying the Average Phase Angle
This function displays the average phase angle recorded during the AuditCheck test. It is
a display function, meaning it cannot be changed by users.
Average Phase Angle
Displaying the Average Peak Signal
This function displays the average peak signal recorded during the AuditCheck test. It is
a display function, meaning it cannot be changed by users.
Average Peak
Setting the Lock-Values Function
This function locks the AuditCheck phase-angle and peak-signal values, so they cannot
be changed when running the detector's auto-calibration function.
AuditCheck Lock
(continued...)
Page 208
Thermo Scientific APEX User's Guide