Keying In The "Detection No-Pack" Distance - Thermo Scientific APEX 100 User Manual

4) Press the right-navigation button to highlight the pack-length function.
Pack Length
5) Press the Go button, and the pack-length input screen appears.
Pack Length
6) Key in the length of the packages you are testing. In the example below, we keyed
in 12.4 centimeters using the detector's navigation buttons.
Pack Length
7) Press the Go button to save your pack-length setting and exit the input screen.

Keying In the "Detection No-Pack" Distance

The "detection no-pack" distance should also be set, as described below.
1) Follow steps 1–3 in the "Keying In the Pack Length" section above to reach this
screen.
Product Shape and Flow
Page 372 Thermo Scientific APEX User's Guide