Set-Up Check List for
Pharmaceutical Applications
This section lists the parameters you have already set (by following the instructions from
the start of the "Setting Up Pharmaceutical Applications" section up to this point in the
manual). This section also lists additional parameters you may want to set up to get
your particular pharmaceutical application running to your satisfaction.
Parameters You Have Already Set Up
Listed below are the parameters you have already set up for a typical pharmaceutical
application.
Product Parameters
•
Product name
Reject Parameters
•
Reject-delay time
•
Reject-duration time
Contaminant-Detection Parameters (Set by the Detector's Calibrate Functions)
•
X and R noise thresholds
•
Speed-filter setting
•
Detect level
•
Phase-angle setting
Page 108
Thermo Scientific APEX User's Guide