Set-Up Check List for Pipeline
Applications
This section lists the parameters you have already set (by following the instructions from
the start of the "Setting Up Pipeline Applications" section up to this point in the manual).
This section also lists additional parameters you may want to set up to get your
particular pipeline application running to your satisfaction.
Parameters You Have Already Set Up
Listed below are the parameters you have already set up for a typical pipeline
application.
Product Parameters
•
Product name
Reject Parameters
•
Reject-delay time
•
Reject-duration time
Contaminant-Detection Parameters (Set by the Detector's Calibrate Functions)
•
X and R noise thresholds
•
Speed-filter setting
•
Detect level
•
Phase-angle setting
Thermo Scientific APEX User's Guide
Page 93