Setting the Product-Select Inputs
Setting the following two input functions allow you to select any of the first three
products as the current running product, using an external device.
Product Select 1 Input
or
Product Select 2 Input
In summary, you set up a physical input (as described in the "Using an External Device
to Switch Products" section above), then use this function set up the logical input for
switching among the first three products. Then, when a signal is received from an
external device such as a PLC, the detector stops analyzing whichever product it is set to
and switches to one of the first three products using the table on the previous page.
Select an input number and a polarity for these inputs. The polarity will determine
whether the input is true when the input voltage is positive.
Thermo Scientific APEX User's Guide
Page 227