3) Press the Go button and navigate to page 2 of the rejects-totals menu.
Reject Registration and Type
4) Press the right-navigation button to select the photo-registration menu. (Your screen
may look slightly different because the detector saves your previous setting.)
Leading Photo Registration
5) Press the Go button repeatedly until a check mark appears beside the type of photo
registration you want to use. (These options are mutually exclusive.) Press the Back
button to save your setting and exit the menu.
Reject is triggered by the product's leading edge.
Reject is triggered by the center of the product. This is
the recommended setting for conveyor applications.
Reject is triggered by the entire length of the product.
Page 34
Thermo Scientific APEX User's Guide