Resetting the Counts with the PE Disabled
This function allows you to reset the current reject count to zero. Note: When you reset
the reject count in this menu, the reject count in the Main Menu is also reset to zero.
Reject Counts Reset
1) Make sure the reset menu is highlighted.
2) Press the Go button and the counts are reset.
Setting the Distance to the Reject-1 Device
See page 44.
Reject 1 Distance/Delay
Changing the Units of Measure
See the small screen shot at the top of page 45 and the text at the bottom of page 44.
Reject 1 Distance/Delay
Setting the Signal Duration for the Reject-1 Device
See page 46.
Reject 1 Duration
Thermo Scientific APEX User's Guide
Page 119