Keying In The Photo-Eye-To-Detector Distance - Thermo Scientific APEX 100 User Manual

3) Press the Go button and the product-speed input screen appears. (The figures in
your screen, however, may be different, because the screen displays the last setting
used.)
Product Speed
4) Use the navigation buttons to input the speed of the conveyor in meters per minute
or feet per minute. Press the Go button to save the conveyor speed (and exit the
input screen).
5) Note that the speed of the conveyor is now displayed in the product-speed section of
the Main Menu.

Keying In the Photo-Eye-to-Detector Distance

The photo-eye-to-detector distance is a critical parameter that must be entered to
ensure your conveyor application works correctly.
1) Take a tape measure and note the distance from the photo-eye (on the upstream or
"in-feed" side of the detector) to the in-feed side of the detector's search head.
2) Make sure the Main Menu is displayed.
Product Name
3) Navigate to the system and tools menu.
System and Tools
Page 28 Thermo Scientific APEX User's Guide