Rejects Menu—Page 1
1) From the Main Menu, navigate the rejects menu.
Reject Totals
2) Press the Go button and page 1 of the rejects menu appears.
Reject 1 Distance and Duration
Resetting the Counts for Reject 1
The appearance of the reject-counts menu depends on whether you are using a photo
eye (PE) to control the reject process. As a general rule, conveyor applications use photo
eyes to control the reject process (PE enabled), but gravity-feed, pipeline, and
pharmaceutical applications do not (PE disabled). Please refer to the appropriated
section listed below.
Resetting the Counts with the PE Enabled
See page 119. (This function is used only in conveyor applications with a product photo
eye.)
Reject Counts Reset
Page 118
Thermo Scientific APEX User's Guide