Setting the Reject-Delay Time
To set the reject-delay time, do the following.
1) From the Main Menu navigate to the rejects menu.
Reject Totals
2) Press the Go button and page 1 of the rejects menu appears.
Reject 1 Distance and Duration
3) Navigate to the reject-1 distance/delay menu shown below.
Reject 1 Distance/Delay
4) Press the Go button and the reject-1 distance/delay input screen appears. Key in an
appropriate value for reject-1 distance/delay. For a typical pipeline application, key
in a value of 0.00 seconds. This allows the reject gate to close immediately, when
metallic contaminants are detected.
Reject 1 Distance/Delay
Page 82
Thermo Scientific APEX User's Guide