Samsung Ubigate iBG3026 Configuration Manual page 93

CT3 Fractional T1
The following example creates a 384 Kbps fractional T1 bundle utilizing DS0s
1-3 and 8-10 of T1 number 3.
Router/configure# interface bundle demo
Router/configure/interface/bundle demo# link ct3 2/0/3:1-3
Router/configure/interface/bundle demo# link ct3 2/0/3:8-10
Router/configure/interface/bundle demo# encap hdlc
Router/configure/interface/bundle demo# ip address 10.1.1.9
24
Router/configure/interface/bundle demo# exit
CT3 T1
The following example creates a 1536 Kbps T1 bundle utilizing T1 number 4.
This bundle uses IP unnumbered.
Router/configure# interface bundle demo1
Router/configure/interface/bundle demo1# link ct3 2/0/4
Router/configure/interface/bundle demo1# encap ppp
Router/configure/interface/bundle demo1# ip address 20.1.1.9
24
Router/configure/interface/bundle demo1# exit
CT3 NxT1
The following example creates a 4.5 Mbps N x T1 bundle utilizing T1s 6-8.
MLPPP is not explicitly specified; a PPP bundle with two or more linked T1s
uses the multi-link protocol by definition.
Router/configure# interface bundle demo2
Router/configure/interface/bundle demo2# link ct3 2/0/6-8
Router/configure/interface/bundle demo1# encap mlppp
Router/configure/interface/bundle demo2# ip addr 30.1.1.3
255.255.255.0
Router/configure/interface/bundle demo2# exit
© SAMSUNG Electronics Co., Ltd.
Ubigate iBG3026 Configuration Guide/Ed.00
57