Samsung Ubigate iBG3026 Configuration Manual page 101

main/configure/interface/bundle MLPPP# exit
main/configure# interface bundle PPP
main/configure/interface/bundle PPP# link ct3 1/0/5
main/configure/interface/bundle PPP# encapsulation ppp
main/configure/interface/bundle PPP# ppp mtu-mru-magic mtu
100-250-1000 mru 100-250-1000
main/configure/interface/bundle PPP# ip address 192.168.2.1
24
main/configure/interface/bundle PPP# exit
Configuring HDLC for Ubigate iBG3026 at Main Site
Configuring Step
Step
1
2
3
4
5
6
7
© SAMSUNG Electronics Co., Ltd.
Command
Router# configure terminal
Router/configure# interface bundle
[bundle name]
Router/configure/bundle/[bundle
name]# link ct3 [slot/port/channel]
Router/configure/bundle/[bundle
name]# encapsulation hdlc
Router/configure/bundle/[bundle
name]# encapsulation hdlc
Router/configure/bundle/[bundle
name]# ip address [IP address]
{ [bit mask] | [number of bits for
mask] }
Router/configure/bundle/[bundle
name]# end
Ubigate iBG3026 Configuration Guide/Ed.00
Purpose
Goes into the terminal
configuration mode.
Sets a bundle interface. 'bundle
name' represents a specific
bundle interface to be configured
at the moment.
Links a channelized T3 interface
to a wan interface
Selects HDLC as an
encapsulation method.
Selects HDLC as an
encapsulation method.
Sets an IP address for the interface.
Return to the 'Router#' prompt.
65