Configuring System Message For Survivable Telephony - Samsung Ubigate iBG3026 Configuration Manual

Step
2
3
4
Configuring System Message for Survivable
Telephony
When Ubigate iBG3026 is converting between Call Manager interworking
mode and Survivable Telephony mode, to inform that mode is converting, it
sends designated messages through MESSAGE method with SIP phone.
This section describes how to send the messages.
How to Configure System Message for Survivable Telephony mode
When Call Manager interworking mode is converted to Survivable Telephony
mode, it sets up the message that would be sent to SIP phone as following
procedures. The basic message is 'Survivable Mode'.
Summary Steps
configure terminal
−
voip-fallback
−
system-message survivable
−
exit
−
© SAMSUNG Electronics Co., Ltd.
Command
voip-fallback
Example)
/configure# voip-fallback
call-forward noan forward-number timeout
timeout
Example)
/configure/voip-fallback# call-forward
noan 4400 timeout 30
Exit
Example)
/configure/voip-fallback# exit
Ubigate iBG3026 Configuration Guide/Ed.00
Purpose
Enters VOIP Fallback
configuration mode.
Specifies Call-forward Number
and no answer timeout
duration for Call Forward-
NoAnswer in Survivable
Telephony mode.
Exits the current mode
(Continued)
667