Samsung Ubigate iBG3026 Configuration Manual page 441

How to Configure UserName and Password for a POTS dial-peer
You can specify UserName and Password per Dial-peer voice pot in the
following way.
Configuration Steps
configure terminal
−
dial-peer voice pots
−
authentication
−
exit
−
Detailed Steps
Step
1 configure terminal
Example)
# configure terminal
2 dial-peer voice {pots | voip} tag
Example)
/configure# dial-peer voice pots 11
3 authentication username username
password password
Example)
configure/ dial-peer/voice/pots
11#authentication username 1001
password 12345678
4 exit
Example)
configure/ dial-peer/voice/pots 11# exit
How to Configure System Default Digest
It is the method of setting the system default digest parameter. You can set the
realm information of the SIP server where UserName/Password are agreed upon.
System default digest parameter will be used default dialpeer have no digest
parameter configuration.Configuration Steps
configure terminal
−
voip-gateway
−
sip-ua
−
authentication
−
exit
−
© SAMSUNG Electronics Co., Ltd.
Ubigate iBG3026 Configuration Guide/Ed.00
Command Purpose
Enters global configuration
mode.
Enters POTS dial-peer
configuration mode
Configure a user name and
password for a POTS dial-peer
Exits the current mode
399