Samsung Ubigate iBG3026 Configuration Manual page 586

CHAPTER 32. ISDN
Delete the ISDN
To delete the ISDN, use the following command
Step
1 configure terminal
2 voice-port 0/0/0:D
3 shutdown
4 No interface bundle
bundleName
Configuring ISDN Calling Number Identification
A router with an ISDN BRI interface might need to supply the ISDN network
with a billing number for outgoing calls. Some networks offer better pricing
on calls in which the number is presented. When configured, this information
is included in the outgoing call Setup message. To configure the interface to
identify the billing number, use the following command in interface
configuration mode:
Step
1 configure terminal
2 Interface bundle
bundle-name
3 Link bri 0/0/0:1
4 isdn
5 Switch-type switch-type
6 Incoming-voice
7 Calling-number calling-
number
8 activate
9 exit
10 Voice-port 0/0/0:D
11 No shutdown
544
Command
Configures to set up bundle.
Configures to set up voice-port.
Shutdown voice port..
Delete interface bundle
Command
Configures to set up bundle.
Sets up bundle name.
Sets up the pertinent physical link.
Sets up ISDN
Sets up the pertinent switch-type with the
content like the following table.
Sets up for voice.
Specifies the calling party number
Activates ISDN.
-
Configure to set up voice port
Turns on the port.
Purpose
Purpose
© SAMSUNG Electronics Co., Ltd.