Table 32.2 Switch-Type Parameter Description (Pri) - Samsung Ubigate iBG3026 Configuration Manual

CHAPTER 32. ISDN
Configuring the ISDN PRI Switch
To configure the switch type, use the following command.
Step
1 configure terminal
2 Interface bundle
bundle-name
3 Link [pri_e1|pri_t1]
0/0/0:1
4 Isdn
5 Switch-type switch-type
*timeslots: E1 PRI is 1 to 31, T1 PRI is 1 to 24.
Switch Type Keywords
Primary-4ess
Primary-5ess
Primary-dms250
Primary-dms100
Primary-ntt
Primary-qsig
Primary-ni2
Primary-euro
Primary-ccitt
Configuring Voice type
To configure the voice type, use the following command.
Step
1 configure terminal
2 Interface bundle
bundle-name
552
Command
Configures to set up bundle.
Sets up bundle name.
Sets up the pertinent physical
link.(slot/subslot/port:*timeslots)
Sets up ISDN
Sets up the pertinent switch-type with the
content like the following table 36.2.

Table 32.2 switch-type parameter description (PRI)

AT & T Primary Rate Switch Type
AT & T Primary Rate Switch Type(default)
DMS250 Primary Rate Switch Type
DMS100 Primary Rate Switch Type
NTT Primary Rate Switch Type
Q Signaling Primary Rate Switch Type(only
user(slave) side)
National ISDN 2 Primary Rate Switch Type
Euro ISDN Primary Rate Switch Type
CCITT/ITU-T Primary Rate Switch Type
Command
Configures to set up bundle.
Sets up bundle name.
Purpose
Description
Purpose
© SAMSUNG Electronics Co., Ltd.