CHAPTER 28. SIP Gateway Management
3.
bind control
To specify the source address of SIP signaling, you have to do the followings.
Configuration Steps
−
−
−
−
Detailed Steps
Step
1
configure terminal
Example)
# configure terminal
2
voip-gateway
Example)
/configure# voip-gateway
3
bind control interface type num
Example)
/configure/voip-gateway# bind control
interface ethernet 0/0
4
exit
Example)
/configure/voip-gateway# exit
4.
bind media
To specify the source address of media stream, you have to do the
followings.
Configuration Steps
−
−
−
−
358
configure terminal
voip-gateway
bind control
exit
Command
configure terminal
voip-gateway
bind media
exit
Purpose
Enters global configuration mode.
Enters voip-gateway configuration
mode.
Sets source interface for signaling.
Exits the current mode
© SAMSUNG Electronics Co., Ltd.