Samsung Ubigate iBG3026 Configuration Manual page 425

Configuring Reason header support
This section describes how to set the use of Reason header in SIP message.
To deliver the Q.850 Cause of PSTN via SIP message in SIP-PSTN
interworking, a reason header is added to SIP message. Ubigate iBG3026
loads the Q.850 Cause received from PSTN to the reason header of SIP
message; and if it receives SIP message including a reason header, it delivers
it to PSTN.
How to Configure Reason Header Support
You can enable the reason header function as follows. The default setting does
not support a reason header.
Configuration Steps
configure terminal
−
voip-gateway
−
sip-ua
−
reason-header override
−
exit
−
exit
−
Detailed Steps
Step
1
2
3
4
© SAMSUNG Electronics Co., Ltd.
Command
configure terminal
Example)
# configure terminal
voip-gateway
Example)
/configure# voip-gateway
sip-ua
Example)
/configure/ voip-gateway# sip-ua
[no] reason-header override
Example)
/configure/voip-gateway/sip-ua#
reason-header override
Ubigate iBG3026 Configuration Guide/Ed.00
Purpose
Enters global configuration mode.
Enters voip-gateway configuration
mode.
Enters sip-ua configuration mode.
Enables or disables reason
header feature.
383