Samsung Ubigate iBG3026 Configuration Manual page 466

CHAPTER 29. H.323 Gateway Management
How to Configure H.323 Bind
1.
setting the IP Address of the interface to be bound
This procedure should be executed first before executing the bind command.
Configuration Steps
−
−
−
−
Detailed Steps
Step
1 configure terminal
Example)
# configure terminal
2 Interface type number
Example)
/configure# interface Ethernet 0/0
3 ip address ip_address subnet_mask
Example)
/configure/interface/ethernet(0/0)# ip
address 90.90.90.90 255.255.255.0
4 exit
Example)
/configure/interface/ethernet(0/0)# exit
2.
shutdown voip-gateway
This procedure should be executed first before executing the bind command
or host ip-address command.
Configuration Steps
−
−
−
−
424
configure terminal
interface
ip address
exit
Command
configure terminal
voip-gateway
shutdown
exit
Purpose
Enters global configuration mode.
Enters interface configuration
mode to configure specific
interface.
Configures a IP Address for an
interface.
Exits the current mode
© SAMSUNG Electronics Co., Ltd.