Samsung Ubigate iBG3026 Configuration Manual page 606

CHAPTER 33. Routing and Digit Manipulation
Answer address-Is used for IP incoming call and is possible to apply to
VoIP dial peer by using digit string. 'answer-address' voip dial-peer
configuration command that represents either calling number or ANI.
Destination pattern-is applicable by using digit string. 'destination-
pattern' dial-peer configuration command representing calling number or
ANI.
Port-displays that port makes call.
Session target-The network address of telephony device or gatekeeper, sip-
server.
Inbound Dial Peers Matching Process
Ubigate iBG3026 tries matching the above information like the following
order.
1.
In the case of POTS, VoIP call, called number and incoming-called-
number
2.
In the case of VoIP call, calling number and answer-address
3.
In the case of POTS, VoIP call, calling number and destination -address
4.
Incoming voice port with configured voice port
5.
Ip address with configured session-target.
The Ubigate iBG3026 should be met with one condition among the mentioned
conditions. To match dial peer, it is sufficient if a single condition is met.
564
When destination patter displays calling number, it does inbound dial
peer matching.
© SAMSUNG Electronics Co., Ltd.