Samsung Ubigate iBG3026 Configuration Manual page 545

Trunk Voice port Management
This section describes management of logical voice ports configured in digital
E1 trunk.
create a DS0 group
delete a DS0 group
configure DS0 group
Create Trunk Voice Port
logically combines DS0 channels in a digital trunk to manage ds0 group.
The following describes the process to create DS0 group.
Step
configure terminal
1
module e1 slot/sub-
2
slot/port
cas-ds0-group ds0-
3
group-no
exit
4
show voice port
5
summary
Delete Trunk Voice Port
deletes DS0 group created in a specific digital trunk.
The following describes the process to delete DS0 group.
Step
configure terminal
1
module e1 slot/sub-
2
slot/port
no cas-ds0-group
3
ds0-group-no
exit
4
show voice port
5
summary
© SAMSUNG Electronics Co., Ltd.
Command
Enter the global configuration mode
selects the trunk to create DS0 group.
ds0-group-no: Identifies the unique DS0 group
(number from 0 to 23, for T1, or from 0 to 30, for
E1) in a specific trunk.
Exit the module configuration mode
Displays all the voice-port configured in the system.
Checks out whether the ds0-group just created
exists or not.
Command
Enter the global configuration mode
selects the trunk to delete DS0 group.
ds0-group-no: Identifies the unique DS0 group
(number from 0 to 23, for T1, or from 0 to 30, for
E1) in a specific trunk.
Exit the module configuration mode
Displays all the voice-port configured in the system.
Checks out whether the ds0-group just deleted
remains or not.
Ubigate iBG3026 Configuration Guide/Ed.00
Purpose
Purpose
503