Samsung Ubigate iBG3026 Configuration Manual page 476

CHAPTER 29. H.323 Gateway Management
Prerequisites for Configuring RAS
The followings should be done first before H.323 gateway performs RAS signalling.
H.323 services should be already enabled.
The information of the H.323 gateway should be previously set on the
gatekeeper to interwork.
How to register or unregister with Gatekeeper
There are 2 types of command used for H.323 gateway to be registered in a
gatekeeper. One is 'gatekeeper ip-address' command where you must enter the
information of the gatekeeper to interwork directly; and the other one is
'gatekeeper name' command, where you enter the gatekeeper information
named by 'voip-peer' command.
You can register or unregister H.323 gateway in/from a gatekeeper in the
following way.
1.
RAS registration or unregistration using 'gatekeeper ip-address' command.
Configuration Steps
−
−
−
−
−
−
−
−
Detailed Steps
Step
1
2
434
configure terminal
voip-gateway
h323-gateway
h323-id
gatekeeper id
[no] gatekeeper ip-address
exit
exit
Command
configure terminal
Example)
# configure terminal
voip-gateway
Example)
/configure# voip-gateway
Purpose
Enters global configuration mode.
Enters voip-gateway configuration
mode.
© SAMSUNG Electronics Co., Ltd.