Samsung Ubigate iBG3026 Configuration Manual page 677

Ubigate iBG3026 Configuration Guide/Ed.00
interface-number Identifies an interface to be monitored for the voice port
busyout function.
in-service(Optional) Configures the voice port to be busied out when any
monitored interface comes into service(its state changes to up). If the keyword
is not entered, the voice port is busied out when all monitored interfaces go
out of service(their state changes to down).
IP address monitoring
To make Peer(by ipaddress) busyout monitoring of a voice port, use busyout
monitor ip-address command in voice-port configuration mode. To remove
Peer(by ipaddress) busyout monitoring, use no command.
Check out the state of the peer if SIP-stack works normally using SIP
OPTIONS message for the system designated to IP address.
busyout monitor ip-address ip-address
no busyout monitor ip-address ip-address
Class monitoring
To make busyout monitoring of busyout class of a voice port, use busyout
monitor class command in voice-port configuration mode. To remove
busyout monitoring of busyout class, use no command.
Refer 'voice class busyout' section for more inforatmion about busyout class
This sets up resources information to be monitored using busyout in which
items are collected.
busyout monitor class <tag>
no busyout monitor class <tag>
<tag>: From 1 to 31 can be used. designates Voice class tag
Use 'busyout monitor <interface type> <interface name>' for Busyout monitor
command used in Voice class busyout configuration mode, and use bundle and
Ethernet for interface type.
To check set up and status information on voice class busyout a user is able to
use 'show voice busyout class' command.
635
© SAMSUNG Electronics Co., Ltd.