Configuring Isdn Bri - Samsung Ubigate iBG3026 Configuration Manual

CHAPTER 32. ISDN

Configuring ISDN BRI

Requirements
Prerequisites
Before you attempt this configuration, ensure that you meet these
prerequisites:
If the router will be the only device attached to the BRI, ask for point-to-
point service and a data-only line.
If the router will be attached to an ISDN bus(to which other ISDN devices
might be attached), ask for point-to-multipoint service and a voice-and-data
line.
Configuration Steps
Create interface bundle to manage the bundle channels on the BRI-'bundle'
Configure ISDN switch type.
Configure Voice type
Activate the ISDN.
Delete the ISDN
Optional Configuration ISDN
Create interface bundle
To create the interface bundle, use the following command.
Step
1 configure terminal
2 Interface bundle
bundle-name
3 Link bri 0/0/0:1
540
Command
Configures to set up bundle.
Designates bundle name.
Sets the pertinent physical link.
Purpose
© SAMSUNG Electronics Co., Ltd.