Samsung Ubigate iBG3026 Configuration Manual page 155

R2 is connected to two different routers and their subnets are
The following example shows the commands used to configure the BGP using
Route-Map for R1.
R1# configure terminal
R1/configure# ip prefix-list inpf seq 5 deny 1.1.1.0/24 ge
26 le 28
R1/configure# ip prefix-list inpf seq 10 permit any
R1/configure# route-map infp permit 1
R1/configure/route-map# match ip address prefix-list inpf
R1/configure/route-map# exit
R1/configure# router bgp 200
R1/configure/bgp 200# neighbor 192.168.10.2 remote-as 300
R1/configure/bgp 200# neighbor 192.168.10.2 route-map inpf
in
The following example shows the commands used to configure the BGP for R2.
R1# configure terminal
R1/configure# router bgp 300
R1/configure/bgp 300# neighbor 192.168.10.1 remote-as 200
R1/configure/bgp 300# network 1.1.1.0/27
R1/configure/bgp 300# network 1.1.2.0/24
© SAMSUNG Electronics Co., Ltd.
Ubigate iBG3026 Configuration Guide/Ed.00
117