Samsung Ubigate iBG3026 Configuration Manual page 561

Trunk Voice port Management
This section describes management of logical voice ports configured in digital
E1 trunk.
create a DS0 group
delete a DS0 group
configure DS0 group
Create Trunk Voce Port
It manages with ds0 group by logically combining DS0 channel, which
belongs to digital trunk. The following describes the procedure to create the
DS0 group.
Step
1
2
3
4
5
Delete Trunk Voice Port
It is a function to delete DS0 group created in a specific digital trunk.
The following describes the procedure to delete DS0 group.
Step
1
2
3
© SAMSUNG Electronics Co., Ltd.
Command
configure terminal
module t1 slot/sub-
slot/port
cas-ds0-group ds0-
group-no
exit
show voice port
summary
Command
configure terminal
module e1 slot/sub-
slot/port
no cas-ds0-group ds0-
group-no
Ubigate iBG3026 Configuration Guide/Ed.00
Purpose
Enter the global configuration mode
Select trunk to create DS0 group.
ds0-group-no: Identifies the unique DS0
group(number from 0 to 23, for T1, or from 0 to
30, for E1) in a specific trunk.
Exit the module configuration mode
Displays all the voice-port configured in the
system.
Checks out whether the ds0-group just created
exists or not.
Purpose
Enter the global configuration mode
Select trunk to delete DS0 group.
ds0-group-no: Identifies the unique DS0
group(number from 0 to 23, for T1, or from 0 to
30, for E1) in a specific trunk.
519