Samsung Ubigate iBG3026 Configuration Manual page 486

CHAPTER 29. H.323 Gateway Management
Detailed Steps
Step
configure terminal
1
Example)
# configure terminal
dial-peer voice {pots | voip} tag
2
Example)
/configure# dial-peer voice voip 100
[no] dtmf-relay {inband | rtp-nte | h245-
3
alphanumeric | queued-digits}
Example)
/configure/ dial-peer/voice/voip 100#
dtmf-relay h245-alphanumeric
Exit
4
Example)
/configure/dial-peer/voice/voip 100# exit
444
Command Purpose
Enters global configuration mode.
Enters VoIP dial-peer
configuration mode.
Specifies how to relay DTMF tone
between telephony interface and
IP network.
- inband: DTMF is sent together
with general voice stream.
- rtp-nte: DTMF is sent unsing the
voice stream, according to the
RFC2833 recommendation
- h245-alphanumeric: DTMF is
sent using H.245
UserInputIndication(alphanumeric)
message.
- queued-digits: DTMF is sent
using the voice stream
according to the RFC2833
recommendation; and
additionally, Queued Digits are
supported for analog-FXS
subscribers.
Exits the current mode
© SAMSUNG Electronics Co., Ltd.