Samsung Ubigate iBG3026 Configuration Manual page 376

CHAPTER 27. VoIP Gateway Management
You can make a setting which enables SIP registration in Call Manager per
dial-peer using register command in a dial-peer configuration mode.
Prerequisites for Call Manager Configurations
For interworking with Call Manager, the registration information of a relevant
Ubigate iBG3026 should be registered in advance. For more information, see
the Call Manager manual.
You should disable VoIP service before setting the Call-server. You cannot set
the call server while VoIP service is enabled.
How to Configure Call Manager
You can set the call server in the following way.
Configuration Steps
configure terminal
−
voip-gateway
−
call-server
−
ip-address
−
gw-uri
−
exit
−
exit
−
Detailed Steps
Step
1 configure terminal
Example)
# configure terminal
2 voip-gateway
Example)
/configure# voip-gateway
3 call-server
Example)
/configure/voip-gateway# call-server
334
Command Purpose
Enters global configuration mode.
Enters voip-gateway configuration
mode.
Enters sip-ua configuration mode.
© SAMSUNG Electronics Co., Ltd.