Table 29.5 H.323 Call Statistics Command; Table 29.6 H.323 Call Tracing & Debug Command - Samsung Ubigate iBG3026 Configuration Manual

CHAPTER 29. H.323 Gateway Management
show h323-gateway h225
show h323-gateway h245
show h323-gateway ras
show h323-gateway release-
cause
To trace and debug the H.323 call in progress, the command described in
Table 29.6 should be entered in a privileged EXEC mode.
debug h323 stack [ h225 | h245
| ras | all ]
debug h323 vcc [ in | out | all ]
[ deb0 | deb1 | deb2 | info | all ]
422

Table 29.5 H.323 Call Statistics Command

Command
Table 29.6 H.323 Call Tracing & Debug Command
Command
Description
Accumulated data per H.225.0 CS message
transceived by H.323 gateway after Ubigate
iBG3026 is booted.
Accumulated data per H.245 message
transceived by H.323 gateway after Ubigate
iBG3026 is booted.
Accumulated data per H.225.0 RAS message
transceived by H.323 gateway after Ubigate
iBG3026 is booted.
Accumulated data per cause of H.225.0
ReleaseComplete message transceived by H.323
gateway after Ubigate iBG3026 is booted.
Description
Shows the ASN.1 information and the encoded
messages of the following messages in
hexadecimal number.
- h225: H.225.0 Call Signalling Message
- h245: H.245 Message
- ras: H.225.0 RAS Message
For the H.323 calls in progress, the following
information is displayed.
- deb0: H.323 Message send and received
- deb1: Internal Call Control Message and Call
State transition information
- deb2: detailed message processing information
- info: not used
© SAMSUNG Electronics Co., Ltd.