Samsung Ubigate iBG3026 Configuration Manual page 311

Hide thumbs Also See for Ubigate iBG3026:
Table of Contents

Advertisement

Bytes In 0, Bytes Out 0
Policy with Priority 1024 is enabled, Direction is outbound
Action permit, Traffic is self
Logging is disable
Source Address is any, Dest Address is any
Source Port is any, Dest Port is any, any
Schedule is disabled, Ftp-Filter is disabled
Smtp-Filter is disabled, Http-Filter is disabled
Rpc-Filter is disabled, Nat is disabled
14.
Configure firewall policies to allow transit traffic from remote LAN to
the local LAN.
Router/configure# firewall corp
Router/configure/firewall corp# policy 1000 in address
10.0.2.0 24 10.0.1.0 24
Router/configure/firewall corp/policy 1000 in# exit
Router/configure/firewall corp# exit
15.
Display firewall policies in the corp map.
Router# show firewall policy corp
Advanced: S-Self Traffic, F-Ftp-Filter, H-Http-Filter,
R-Rpc-Filter, N-Nat-Ip/Nat-Pool, L-Logging,
E-Policy Enabled, M-Smtp-Filter
Pri Dir Source Addr Destination Addr Sport Dport Proto
Action Advanced
--- --- ----------- ---------------- ----------------- -----
- --------
1000 in 10.0.2.0/24 10.0.1.0/24 any any any PERMIT E
1022 out any any any any any PERMIT SE
1023 in any any any any any PERMIT SE
1024 out any any any any any PERMIT E
© SAMSUNG Electronics Co., Ltd.
Ubigate iBG3026 Configuration Guide/Ed.00
271

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents