Samsung Ubigate iBG3026 Configuration Manual page 406

CHAPTER 28. SIP Gateway Management
How to Configure Call Manager
You can set the call server in the following way.
Configuration Steps
configure terminal
−
voip-gateway
−
call-server
−
ip-address
−
gw-uri
−
exit
−
exit
−
Detailed Steps
Step
1 configure terminal
Example)
# configure terminal
2 voip-gateway
Example)
/configure# voip-gateway
3 call-server
Example)
/configure/voip-gateway# call-server
4 ip-address ip-addr [udp | tcp | tls] [sip |
sips] [expires expires] [retry retry]
Example)
/configure/voip-gatway/call-server# ip-
address ipv4:90.90.90.100
5 gw-uri uri [expires expires] [retry retry]
Example)
/configure/voip-gateway/call-server# gw-uri
sip:ibg3026@samsung.com
6 Exit
Example)
/configure/voip-gateway/call-server# exit
364
Command Purpose
Enters global configuration
mode.
Enters voip-gateway
configuration mode.
Enters sip-ua configuration
mode.
Sets the SIP Signaling IP
Address of Call Manager. And
you can also configure
transport type, uri type, default
registration expires, and retry
interval.
Set the URI where a Ubigate
iBG3026 will be registered in
Call Manager. And you can
also configure registration
expires and retry interval.
Exits the current mode
© SAMSUNG Electronics Co., Ltd.