Samsung Ubigate iBG3026 Configuration Manual page 143

The following example shows the commands used to configure the host name
in the figure.
Router# configure terminal
Router/configure# hostname iBG3026
iBG3026/configure#
Configuring Local Network Interface
Configuring Step
Step
1
2
3
Configuring Example
The following example shows the commands used to configure the local
network ip address.
iBG3026/configure# interface ethernet 0/1
iBG3026/configure/interface/ethernet(0/1)# ip address
10.10.10.1 24
iBG3026/configure/interface/ethernet(0/1)# exit
iBG3026/configure#
© SAMSUNG Electronics Co., Ltd.
Command
iBG3026/configure# interface ethernet
[slot/port]
iBG3026/configure/interface/ethernet#
ip address [IP address] { [bit mask] |
[number of bits for mask] }
iBG3026/configure/interface/ethernet#
exit
Ubigate iBG3026 Configuration Guide/Ed.00
Purpose
Enters the ethernet interface
configuration mode.
Sets the local ip address.
Returns to the upper
configuration level
105