Samsung Ubigate iBG3026 Configuration Manual page 50

CHAPTER 3. Management Configuration
19. SUBMARINE-HISTORY-MIB.mib
20. SUBMARINE-ALARM-MIB.mib
21. SUBMARINE-SYSLOG-MIB.mib
22. SUBMARINE-RM-MIB.mib
23. SUBMARINE-QOS-MIB.mib
24. SUBMARINE-VOICE-MIB.mib
25. SUBMARINE-ISM-IPS-MIB.mib
The Enterprise MIB folder includes the following individual MIB.
SUBMARINE-BUNDLE-MIB.mib
Use bundle.mib to manage bundles and links within bundles. Compile
bundle.mib before you compile ppp.mib, fr.mib, ghdlc.mib.Use bundle.mib to:
Be notified when a bundle goes down(bundleDownTrap)
Be notified when a bundle comes up(bundleUpTrap)
Be notified when a link goes down(linkDownTrap)
Be notified when a link comes up(linkUpTrap)
SUBMARINE-CHASSIS-MIB.mib
Use chassis.mib to manage the platform.
SUBMARINE-CONFIG-MIB.mib
Use config.mib to manage configuration data on the router, in memory, or on
the network.
Use this MIB to:
Be notified when the configuration changes(cfgEventChangeNotification)
Be notified when the configuration is saved(cfgEventSaveNotification)
SUBMARINE-DSX-TC.mib
Compile this MIB before any other DSX MIBs. It does not contain any traps.
SUBMARINE-DSX-TE1-MIB.mib
This MIB manages T1/E1 interfaces. Use this MIB to
Be notified when an alarm is generated(dsxT1E1AlarmOnTrap)
Be notified when an alarm is turned off(dsxT1E1AlarmOffTrap)
16
© SAMSUNG Electronics Co., Ltd.