Samsung Ubigate iBG3026 Configuration Manual page 702

CHAPTER 36. Management
Step
2
3
4
5
6
7
CDR Attributes
The CDR in the Ubigate iBG3026 system transmits accounting request packet
according to RADIUS specification described in RFC2865, RFC2866.
The attribute described in Table 36.1 below is used and numerous Vendor
Specific Attributes are included.
660
Command
aaa authentication login
Example)
/configure# aaa authentication login default
radius
aaa authentication protocol
Example)
configure #aaa authentication protocol
default pap
aaa radius
Example)
configure # aaa radius primary
10.254.167.244
configure # aaa radius shared testing123
voip-gateway
Example)
configure #voip-gateway
gw-accounting
Example)
configure/voip-gateway# ga-accounting
Exit
Example)
configure/voip-gateway# exit
(Continued)
Purpose
Configure authentication
login information
Configure protocol
Configure RADIUS
Enter voip-gateway
configuration mode
Configure gw-accounting
enable
Exits the current mode
© SAMSUNG Electronics Co., Ltd.