Samsung Ubigate iBG3026 Configuration Manual page 541

By using show module configuration, it is possible to check out carrier type of
the trunk working.
v239# show module configuration t1 0/1/0
T1 0/1/0 is ENABLED
Alarm Hierarchy: TRUE,
Yellow Alarm: DISABLE
Framing:ESF, LineCode:B8ZS, ClockSource: INT, LineMode:CSU, LBO:0 db
FDL: ANSI Unit Protocol enabled ,ATT Unit Protocol disabled ,
CsuDsuType: CSU , Loopback Framing(In-band): Overwrite,
CIRCUIT-ID: Not Configured ,CONTACT-INFO: Not Configured ,
DESCRIPTION: Not Configured , LINK NAME: Not Configured ,
Line Status:
RLOS:OFF
TRAI:OFF
Timeslot Map:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
____________________________________________________________________
___
|0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0
|0 |
|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|_
_|__|
v239# show module configuration all
T1 #
--------------------------------------------------------------------
0/1/1
0/1/0
© SAMSUNG Electronics Co., Ltd.
RAIS:OFF RLOF:OFF
TPtrn:OFF Loop:OFF
Framing Coding
esf b8zs
esf b8zs
Ubigate iBG3026 Configuration Guide/Ed.00
RRAI:OFF
ClkSrc LBO-CableLength
int csu/0db
int csu/0db
TAIS:OFF
State Alarm
up N/A
up N/A
499