Samsung Ubigate iBG3026 Configuration Manual page 36

CHAPTER 1. Basic Configuration
Changing Password
This procedure enables the system administrator or any user to change their
password on a Ubigate iBG3026
Step
1
2
3
4
5
Changing Administrator Account
This procedure changes the system administrator login name to a user-specific
name. Note that the default is samsung.
Step
1
2
After the change, the system displays
Administrator account name changed to [new_account]
to confirm it.
Setting Date and Time
There are three commands in 'configure' mode to support date and time
setting. To set the current time for the router in Universal Time Coordinated
time, specify the time zone offset ahead(+) or behind(-) the time in
Greenwich(England), the number of hours ahead or behind Greenwich time,
and the number of minutes ahead or behind the time in Greenwich.
2
Command
Router# password
Type the current user name, and
then press Return
Type the current password, and
then press Return
Type your new password, and
then press Return
Type the new password again,
and then press Return
Command
Router# configure terminal
Router/configure# admin_name
[new_account]
TM
Router.
The command for changing
password
The system prompts for the current
username to athenticate.
The system prompts for the current
password.
The system prompts for the new
password.
The system prompts you to verify
the new password.
Accesses the configure mode
Changes the account name
Description
Description
© SAMSUNG Electronics Co., Ltd.