Samsung Ubigate iBG3026 Configuration Manual page 245

To configure CoS marking actions, enter:
Router/configure/qos/policy-map <map-name>/policy-class
<classname># mark-dscp <DSCP(0..63)>
Router/configure/qos/policy-map <map-name>/policy-class
<classname># mark-up <UP(0..7)>
Router/configure/qos/policy-map <map-name>/policy-class
<classname># mark-outq <queue-id(1..8)>
Router/configure/qos/policy-map <map-name>/policy-class
<classname># mark-dp <DP(0..2)>
To map the policy created above to an interface, enter:
Router/configure/interface/ethernet (<name>)/qos# service-
policyinput <map-name>
Configuration Example
Router/configure/qos# policy-map map2
Router/configure/qos/policy-map map2# policy-class class2
Router/configure/qos/policy-map map2/policy-class class2#
match ipv4
Router/configure/qos/policy-map map2/policy-class class2#
mark-dp 2
Router/configure/qos/policy-map map2/policy-class class2#
markdscp 3
Router/configure/qos/policy-map map2/policy-class class2#
markoutq 5
Router/configure/qos/policy-map map2/policy-class class2#
mark-up 3
Router/configure/interface/ethernet (3/0)/qos# service-
policyinput map2
Verifying the Configuration
Use the following commands to verify the configuration:
show qos policy-map
show qos policy-class
© SAMSUNG Electronics Co., Ltd.
Ubigate iBG3026 Configuration Guide/Ed.00
207