Samsung Ubigate iBG3026 Configuration Manual page 681

busyout(Optional) Busyout the T1/E1 channels if the resource is not available.
treatment(Optional) Applies call treatment from the session application if the
resource is not available.
The default is busyout and treatment for global resource triggers.
Memory consumption
This is the function that checks total utilization of memory at 5 second-intervals,
and processes busyout or treatment when utilization is more than the designated
high value, and operates normally when it is less than the low value
To monitor memory which is the global resource of Ubigate iBG3026 gateway.
A user can set it up using 'call-admission threshold global' command that is
the global CAC configuration, and release it using 'no' command.
A user is able to call-admission control, monitor utilization by using total-
mem trigger of call-admission threshold global.
Call-admission threshold global trigger-name low value high value
[busyout] [treatment]
no call-admission threshold global trigger-name low 0 high 0
show call-admission threshold config
Trigger-name is the value of total-mem against memory utilization. One of the
followings can be used.
cpu-5sec-CPU utilization in the last 5 seconds.
cpu-avg-Average CPU utilization.
total-calls-Total number of calls.
total-mem-Total memory utilization.
low value Value of low threshold: Range is from 1 to 100% for the utilization
triggers; 1 to 10000 calls for total-calls
high value Value of high threshold: Range is from 1 to 100% for the
utilization
triggers; 1 to 10000 calls for total-calls.
busyout(Optional) Busyout the T1/E1 channels if the resource is not available.
© SAMSUNG Electronics Co., Ltd.
Ubigate iBG3026 Configuration Guide/Ed.00
639