Samsung Ubigate iBG3026 Configuration Manual page 526

CHAPTER 30. Analog Voice Port
Bell-South Case
'signal cama-bellsouth' Option is the option for the time to transmit ANI of
CAMA functions. General CAMA immediately transmits ANI right after
transmission of KP+911+ST, on the while if cama-bellsouth Option is applied,
it transmits ANI once after reception of off-hook.
When the PSAP receives the complete ANI information, the PSAP equipment
will signal the call takers and return audible ringing to the calling PBX party.
Upon answer, the PSAP will disconnect audible ringing, connect the call to the
answering attendant, display the ANI at the answering position, and return an
off-hook signal to the PBX indicating that the call has been answered.
PBX E911 SWITCH
1. SEIZE --------------- (OFF-HOOK) ----------------------->
2. <----------- WINK START (l40 ms TO 290 ms) ------------->
3. KP 911 ST ---------------------------------------------->
4. <------------------------------------------------OFF-HOOK
5. KP I NXXXXXX ST (ANI) ---------------------------------->
6. <--------------- TALKING PATH CONNECTED ---------------->
Calling party goes on-hook
7. PBX DISCONNECTS ------------- (ON-HOOK) ---------------->
8. <---------------- 911 SWITCH DISCONNECTS -------- ON-HOOK
How to Configure CAMA
To configure CAMA function using analog FXO, follow the next procedures.
Configuration Steps
configure terminal
−
voice-port
−
dial-peer voice pots
−
exit
−
484
© SAMSUNG Electronics Co., Ltd.